DynaStrip releases for Windows

Compatible with: Windows 2000, XP or Vista

If you have version 5.X and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 6.0.2 - Windows

Corrections and Enhancements

PDF support
• 4048, 4142, 4308 DynaStrip threw COI (indexing) errors when processing compressed PDF files. These errors prevented the correct detection of files. This situation has been corrected. 

Installation
• 5104 On a multi-users workstation, DynaStrip could be used only by the user who installed it.
Different users on a single workstation can now run DynaStrip.

For more technical information, please refer to the Release notes for this version.

Compatible with: Windows 2000, XP or Vista

If you have version 5.X and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 6.0.2 - Windows

Corrections et améliorations

Soutien PDF 
• 4048, 4142, 4308 DynaStrip déclarait des erreurs “COI” (indexation) lors du traitement de fichiers PDF compressés. Ces erreurs empêchaient la détection correcte des fichiers. La situation a été rectifiée. 

Installation 
• 5104 Sur un poste multi-usager, DynaStrip ne pouvait être utilisé que par l’utilisateur l’ayant installé. Dorénavant, les différents utilisateurs d’un même poste peuvent utiliser DynaStrip. 

Pour plus de détails, consultez les Notes de version.

Compatible with: Windows 2000, XP or Vista

If you have version 5.X and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 6.0.2 - Windows

Corrections and Enhancements

PDF support
• 4048, 4142, 4308 DynaStrip threw COI (indexing) errors when processing compressed PDF files. These errors prevented the correct detection of files. This situation has been corrected. 

Installation
• 5104 On a multi-users workstation, DynaStrip could be used only by the user who installed it.
Different users on a single workstation can now run DynaStrip.

For more technical information, please refer to the Release notes for this version.

Compatible with: Windows 2000, XP or Vista

If you have version 5.X and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 6.0.2 - Windows

Corrections and Enhancements

PDF support
• 4048, 4142, 4308 DynaStrip threw COI (indexing) errors when processing compressed PDF files. These errors prevented the correct detection of files. This situation has been corrected. 

Installation
• 5104 On a multi-users workstation, DynaStrip could be used only by the user who installed it.
Different users on a single workstation can now run DynaStrip.

For more technical information, please refer to the Release notes for this version.

Compatible with: Windows 2000, XP or Vista

If you have version 5.2 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 5.3.1 - Windows

Fixes in Release 5.3.1

Light table 
• 4282 Deleting more than 31 sheets can be done and undone without problem. 
• 4234 DynaStrip is now stable after adding some page marks that had just been deleted. 
• 4278 Text tags on the sheet now output correctly if text alignment is "Right" or "Center".
 
Export
• 3654 Exporting ATM templates (.tpl) with two single-sided sheets is now supported. 
• 4228 Using two collating marks on two signatures reflect the right collating sections when exported as ATM templates (.tpl).

Document Files and Filters
• 4061 A Postscript filter has been upgraded for files created with QuarkXpress 8 Mac.
• 4175, 4295, 4297, 4310, 4309, 4338, Different Postscript filters have been upgraded for files created with Adobe InDesign v.10 (CS4).
• 2548, 4296, 4335, 4404 Better support for various PDF and PS document files.

JDF Input
• 4222 A pagination problem when importing JDF Stripping files from Optimus MIS has been resolved. 
• 4224 When importing JDF data, the Orientation attribute is read for all signatures.
• 4333 The "Binding" information is now correctly extracted from JDF Stripping files.

JDF Output 
• 3801 DynaStrip JDF output files now include the "BindingIntent / BindingOrder" meta-data that allows Apogee Prepress to create 2-up layouts for proofing.

For more technical information, please refer to the Release notes for this version.

Compatible with: Windows 2000, XP or Vista

If you have version 5.2 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 5.3.1 - Windows

Corrections dans la version 5.3.1

Table lumineuse
• 4282 La suppression de plus de 31 feuilles peut être effectuée et rétablie sans problème.
• 4234 DynaStrip est maintenant stable après l’ajout de marques de pages venant tout juste d’être supprimées.
• 4278 Les marques de texte liées à la feuille sortent correctement si l’alignement du texte est "À droite" ou "Centré".

Export
• 3654 L’export de modèles pour ATM (.tpl) contenant plusieurs feuilles recto seulement est maintenant pris en charge.
• 4228 Deux marques d’assemblage sur deux signatures dans DynaStrip identifient les bonnes sections une fois exportées en modèle pour ATM (.tpl). 

Documents et filtres
• 4061 Le filtre Postscript a été mis à jour pour les fichiers créés avec QuarkXpress 8 pour Mac.
• 4175, 4295, 4297, 4310, 4309, 4338, Différents filtres Postscript ont été modifiés pour les fichiers créés avec Adobe InDesign v.10 (CS4).
• 2548, 4296, 4335, 4404 Amélioration de la prise en charge pour différents types de documents PDF et PS. 

Import JDF
• 4222 Un problème de pagination lors de l’import de fichiers JDF Stripping provenant du MIS Optimus a été résolu.
• 4224 Lors de l’import de données JDF, l’attribut Orientation est lu pour toutes les signatures.
• 4333 L’information "Binding" est maintenant extraite correctement des fichiers JDF Stripping.

Export JDF
• 3801 Les fichiers de sortie JDF de DynaStrip incluent maintenant les métadonnées "BindingIntent / BindingOrder" permettant à Apogee Prepress de créer des épreuves double pages. 

Plusieurs corrections ont été apportées. Pour plus de détails, consultez les Notes de version.

Compatible with: Windows 2000, XP or Vista

If you have version 5.2 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 5.3.1 - Windows

Fixes in Release 5.3.1

Light table 
• 4282 Deleting more than 31 sheets can be done and undone without problem. 
• 4234 DynaStrip is now stable after adding some page marks that had just been deleted. 
• 4278 Text tags on the sheet now output correctly if text alignment is "Right" or "Center".
 
Export
• 3654 Exporting ATM templates (.tpl) with two single-sided sheets is now supported. 
• 4228 Using two collating marks on two signatures reflect the right collating sections when exported as ATM templates (.tpl).

Document Files and Filters
• 4061 A Postscript filter has been upgraded for files created with QuarkXpress 8 Mac.
• 4175, 4295, 4297, 4310, 4309, 4338, Different Postscript filters have been upgraded for files created with Adobe InDesign v.10 (CS4).
• 2548, 4296, 4335, 4404 Better support for various PDF and PS document files.

JDF Input
• 4222 A pagination problem when importing JDF Stripping files from Optimus MIS has been resolved. 
• 4224 When importing JDF data, the Orientation attribute is read for all signatures.
• 4333 The "Binding" information is now correctly extracted from JDF Stripping files.

JDF Output 
• 3801 DynaStrip JDF output files now include the "BindingIntent / BindingOrder" meta-data that allows Apogee Prepress to create 2-up layouts for proofing.

For more technical information, please refer to the Release notes for this version.

Compatible with: Windows 2000, XP or Vista

If you have version 5.2 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 5.3.1 - Windows

Fixes in Release 5.3.1

Light table 
• 4282 Deleting more than 31 sheets can be done and undone without problem. 
• 4234 DynaStrip is now stable after adding some page marks that had just been deleted. 
• 4278 Text tags on the sheet now output correctly if text alignment is "Right" or "Center".
 
Export
• 3654 Exporting ATM templates (.tpl) with two single-sided sheets is now supported. 
• 4228 Using two collating marks on two signatures reflect the right collating sections when exported as ATM templates (.tpl).

Document Files and Filters
• 4061 A Postscript filter has been upgraded for files created with QuarkXpress 8 Mac.
• 4175, 4295, 4297, 4310, 4309, 4338, Different Postscript filters have been upgraded for files created with Adobe InDesign v.10 (CS4).
• 2548, 4296, 4335, 4404 Better support for various PDF and PS document files.

JDF Input
• 4222 A pagination problem when importing JDF Stripping files from Optimus MIS has been resolved. 
• 4224 When importing JDF data, the Orientation attribute is read for all signatures.
• 4333 The "Binding" information is now correctly extracted from JDF Stripping files.

JDF Output 
• 3801 DynaStrip JDF output files now include the "BindingIntent / BindingOrder" meta-data that allows Apogee Prepress to create 2-up layouts for proofing.

For more technical information, please refer to the Release notes for this version.

Compatible with: Windows 2000, XP or Vista

If you have version 5.1 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 5.2.0 - Windows

Barcodes

DynaStrip 5.2 now supports different barcode standards for integration with post-press equipments. Supported standards include the 2/5 interleaved used by WST Systemtechnik GmbH, as well as the Code128c and the 2/5 interleaved standards read by Müller Martini AG Asir (Automatic Signature Image Recognition). Barcodes that are attached to signatures on the imposition template are dynamically actualized by DynaStrip for each signature. When gathering the product, an optical reader scans barcodes to verify if signatures are missing or misplaced in the publication. The following faults can be detected:
• Missing sheets in the product
• Sheets with an incorrect product number, for example from another job
• Incorrect sequence of sheets
• Incorrect orientation of sheets in the feeder
The application is able to print barcodes in the following formats: PDF, PS, EPS, PJTF and JDF.

New Option for Page Marks

A new option in the Pagination Sequence dialogue allows the page marks and page outline to follow the creep compensation adjustment or to remain static. The current default behaviour of DynaStrip is to move the page marks with the creep compensation adjustment.
When the sheet must be cut in sections before the folding and trimming, static page marks will allow for easier alignment of cutters.

Automatic Color Addition

A new option (Add all colors automatically to the color table) has been added to the Preferences dialogue to allow a complete automation of the insertion of source documents in DynaStrip. When this option is selected, all detected colors are automatically added to the color table without warning the user.
This option is especially useful for DynaStream automation module. It should be used with care, only in preflighted workflow environments to avoid the creation of extra color plates.

Enhancements to DynaStrip Automation

The DynaStream module (that is part of DynaStrip Automation edition) has been improved to increase its automation level.
New options now allow for automated deleting or moving input source document files to another location once the job has been processed and all flats are output. This clears up the hot folder which is then ready to receive new document files. DynaStream can then start over a new job without any user intervention, based on the same layout.
These options are offered as DynaStream preferences.

Fixes in Release 5.2.0

Several bugs have been resolved. For more details, see the Release Notes for this version. 

Compatible with: Windows 2000, XP or Vista

If you have version 5.1 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 5.2.0 - Windows

Codes à barres

DynaStrip 5.2 prend maintenant en charge différents standards de codes à barres pour assurer l’intégration avec les équipements de post-presse. Ces standards incluent le 2/5 entrelacé utilisé par le lecteur de WST Systemtechnik GmbH, ainsi que les standards Code128c et 2/5 entrelacé interprétés par la technologie Asir (Automatic Signature Image Recognition) de Müller Martini AG. Les codes à barres qui sont attachés aux signatures sur le gabarit d’imposition sont actualisés de façon dynamique par DynaStrip sur chaque signature. Lors de l’assemblage du produit, un lecteur optique balaie les codes à barres pour vérifier si des signatures sont manquantes ou mal positionnées dans la publication. Les problèmes suivants peuvent être détectés: 
• Feuilles de presse manquantes dans le produit
• Feuilles de presse comportant un numéro d’identification incorrect, provenant, par exemple, d’un autre travail 
• Séquence de feuilles incorrecte 
• Orientation de feuille incorrecte dans le système d’alimentation
L’application est en mesure d’imprimer les codes à barres dans les formats suivants: PDF, PS, EPS, PJTF et JDF.

Nouvelle option pour les marques de page

Une nouvelle option dans le dialogue de Séquence de pagination permet aux marques de page et aux contours de page de suivre l’ajustement de compensation de chasse ou de rester statique. Le comportement par défaut de DynaStrip est de déplacer les marques de page en fonction de l’ajustement pour la chasse. 
Lorsque la feuille doit être pré-coupée en sections avant le pliage et le rognage, les marques de page statiques permettent un alignement plus facile du massicot.

Addition automatique des couleurs

Une nouvelle option pour l’addition automatique des couleurs dans la table des couleurs a été ajoutée au dialogue des Préférences pour permettre une automatisation complète de l’insertion des documents sources dans DynaStrip. Lorsque cette option est sélectionnée, toutes les couleurs détectées sont automatiquement ajoutées à la table des couleurs sans avertissement.
Cette option est spécialement utile avec le module d’automatisation DynaStream. Elle doit être utilisée avec précaution, dans des environnements de flux de production sécurisés afin d’éviter la création de plaques de couleurs non désirées.

Améliorations à DynaStrip Automation

Le module DynaStream, faisant partie de l’édition DynaStrip Automation, a été amélioré afin d’accroître son niveau d’automatisation.
De nouvelles options permettent maintenant de détruire ou de déplacer les fichiers des documents sources vers un autre répertoire lorsque le travail a été exécuté et que toutes les plaques ont été imprimées. Ceci a pour effet de vider le dossier actif (hot folder) qui est alors prêt à recevoir de nouveaux fichiers de documents. DynaStream peut donc recommencer un nouveau travail sans aucune intervention de l’utilisateur, à partir du même plan d’imposition.
Ces options sont offertes par les paramètres du module DynaStream.

Corrections de la version 5.2.0

Plusieurs corrections ont été apportées. Pour plus de détails, consultez les Notes de version.

Compatible with: Windows 2000, XP or Vista

If you have version 5.1 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 5.2.0 - Windows

Barcodes

DynaStrip 5.2 now supports different barcode standards for integration with post-press equipments. Supported standards include the 2/5 interleaved used by WST Systemtechnik GmbH, as well as the Code128c and the 2/5 interleaved standards read by Müller Martini AG Asir (Automatic Signature Image Recognition). Barcodes that are attached to signatures on the imposition template are dynamically actualized by DynaStrip for each signature. When gathering the product, an optical reader scans barcodes to verify if signatures are missing or misplaced in the publication. The following faults can be detected:
• Missing sheets in the product
• Sheets with an incorrect product number, for example from another job
• Incorrect sequence of sheets
• Incorrect orientation of sheets in the feeder
The application is able to print barcodes in the following formats: PDF, PS, EPS, PJTF and JDF.

New Option for Page Marks

A new option in the Pagination Sequence dialogue allows the page marks and page outline to follow the creep compensation adjustment or to remain static. The current default behaviour of DynaStrip is to move the page marks with the creep compensation adjustment.
When the sheet must be cut in sections before the folding and trimming, static page marks will allow for easier alignment of cutters.

Automatic Color Addition

A new option (Add all colors automatically to the color table) has been added to the Preferences dialogue to allow a complete automation of the insertion of source documents in DynaStrip. When this option is selected, all detected colors are automatically added to the color table without warning the user.
This option is especially useful for DynaStream automation module. It should be used with care, only in preflighted workflow environments to avoid the creation of extra color plates.

Enhancements to DynaStrip Automation

The DynaStream module (that is part of DynaStrip Automation edition) has been improved to increase its automation level.
New options now allow for automated deleting or moving input source document files to another location once the job has been processed and all flats are output. This clears up the hot folder which is then ready to receive new document files. DynaStream can then start over a new job without any user intervention, based on the same layout.
These options are offered as DynaStream preferences.

Fixes in Release 5.2.0

Several bugs have been resolved. For more details, see the Release Notes for this version. 

Compatible with: Windows 2000, XP or Vista

If you have version 5.1 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 5.2.0 - Windows

Barcodes

DynaStrip 5.2 now supports different barcode standards for integration with post-press equipments. Supported standards include the 2/5 interleaved used by WST Systemtechnik GmbH, as well as the Code128c and the 2/5 interleaved standards read by Müller Martini AG Asir (Automatic Signature Image Recognition). Barcodes that are attached to signatures on the imposition template are dynamically actualized by DynaStrip for each signature. When gathering the product, an optical reader scans barcodes to verify if signatures are missing or misplaced in the publication. The following faults can be detected:
• Missing sheets in the product
• Sheets with an incorrect product number, for example from another job
• Incorrect sequence of sheets
• Incorrect orientation of sheets in the feeder
The application is able to print barcodes in the following formats: PDF, PS, EPS, PJTF and JDF.

New Option for Page Marks

A new option in the Pagination Sequence dialogue allows the page marks and page outline to follow the creep compensation adjustment or to remain static. The current default behaviour of DynaStrip is to move the page marks with the creep compensation adjustment.
When the sheet must be cut in sections before the folding and trimming, static page marks will allow for easier alignment of cutters.

Automatic Color Addition

A new option (Add all colors automatically to the color table) has been added to the Preferences dialogue to allow a complete automation of the insertion of source documents in DynaStrip. When this option is selected, all detected colors are automatically added to the color table without warning the user.
This option is especially useful for DynaStream automation module. It should be used with care, only in preflighted workflow environments to avoid the creation of extra color plates.

Enhancements to DynaStrip Automation

The DynaStream module (that is part of DynaStrip Automation edition) has been improved to increase its automation level.
New options now allow for automated deleting or moving input source document files to another location once the job has been processed and all flats are output. This clears up the hot folder which is then ready to receive new document files. DynaStream can then start over a new job without any user intervention, based on the same layout.
These options are offered as DynaStream preferences.

Fixes in Release 5.2.0

Several bugs have been resolved. For more details, see the Release Notes for this version. 

Compatible with: Windows NT, 2000, XP or Vista

If you have version 5.0 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 5.1.2 - Windows

Fixes and Changes

Several bugs have been resolved. For more details, see the Release Notes for this version. 
Plusieurs corrections ont été apportées. Pour plus de détails, consultez les Notes de version.

Compatible with: Windows NT, 2000, XP or Vista

If you have version 5.0 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 5.1.2 - Windows

Fixes and Changes

Several bugs have been resolved. For more details, see the Release Notes for this version. 
Plusieurs corrections ont été apportées. Pour plus de détails, consultez les Notes de version.

Compatible with: Windows NT, 2000, XP or Vista

If you have version 5.0 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 5.1.2 - Windows

Fixes and Changes

Several bugs have been resolved. For more details, see the Release Notes for this version. 
Plusieurs corrections ont été apportées. Pour plus de détails, consultez les Notes de version.

Compatible with: Windows NT, 2000, XP or Vista

If you have version 5.0 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 5.1.2 - Windows

Fixes and Changes

Several bugs have been resolved. For more details, see the Release Notes for this version. 
Plusieurs corrections ont été apportées. Pour plus de détails, consultez les Notes de version.

Compatible with: Windows NT, 2000, XP or Vista

If you have version 4.6 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 5.0.2 - Windows

Fixes in Release 5.0.2

Export/Import
• 2543 When importing a Preps template, the interpretation of the Preps page marks has been
improved.
• 2545 When importing a Preps template, the interpretation of the bleed has been improved.
• 2547 When importing a Preps template, the trim marks (crop marks) positionning has been
improved. The trim marks are now present in all gutters.
• 2567 When importing a Preps template, DynaStrip now supports the asymmetric fold mark.
• 2278 Bleed marks are no longer added by DynaStrip when a Preps template is imported.

Installation
• 2514 The installer now includes all required dll for Windows XP and Vista.

JT-Flow
• 2546 All popup messages have now been redirected and are displayed in the JT-Flow console.

Marks
• 2501 DynaStrip French version now keeps all mark sets settings.

Output
• 2599 DynaStrip PDF imposed flats are now identical to the raster preview for documents
containing certain types of edited PDF objects.
• 2616 A problem with the creep direction has been fixed.

For more technical information, please refer to the Release notes of DynaStrip 5.0.2.

Compatible with: Windows NT, 2000, XP or Vista

If you have version 4.6 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 5.0.2 - Windows

Corrections dans la version 5.0.2

Export/Import
• 2543 Quand un modèle de Preps est importé, l’interprétation des marques de pages de Preps a
été améliorée.
• 2545 Quand un modèle de Preps est importé, l’interprétation du fond perdu a été améliorée.
• 2547 Quand un modèle de Preps est importé, le positionnement des marques de page a été
amélioré. Les marques de page sont maintenant présentes dans toutes les gouttières.
• 2567 Quand un modèle de Preps est importé, DynaStrip supporte maintenant les marques de
pliage asymétriques.
• 2278 Des marques de fond perdu ne sont plus ajoutées par DynaStrip quand un modèle de
Preps est importé. 

Installation
• 2514 L’installateur contient maintenant tous les dll requis pour Windows XP et Vista. 

JT-Flow
• 2546 Tous les messages d’avertissements ont maintenant été redirigés dans la console de JTFlow.

Marques
• 2501 La version française de DynaStrip garde maintenant toutes les configurations des jeux de
marques. 

Sortie
• 2599 Les plaques DynaStrip imposées en PDF sont maintenant identiques à la prévisualisation
pour les documents contenant certains types d’objets PDF édités.
• 2616 Un problème concernant la direction de la chasse a été corrigé.

Pour plus d'information technique, veuillez consulter les Notes de version de DynaStrip 5.0.2.

Compatible with: Windows NT, 2000, XP or Vista

If you have version 4.6 and lower, you must purchase an upgrade.

What is new in this release: DynaStrip 5.0.2 - Windows

Fixes in Release 5.0.2

Export/Import
• 2543 When importing a Preps template, the interpretation of the Preps page marks has been
improved.
• 2545 When importing a Preps template, the interpretation of the bleed has been improved.
• 2547 When importing a Preps template, the trim marks (crop marks) positionning has been
improved. The trim marks are now present in all gutters.
• 2567 When importing a Preps template, DynaStrip now supports the asymmetric fold mark.
• 2278 Bleed marks are no longer added by DynaStrip when a Preps template is imported.

Installation
• 2514 The installer now includes all required dll for Windows XP and Vista.

JT-Flow
• 2546 All popup messages have now been redirected and are displayed in the JT-Flow console.

Marks
• 2501 DynaStrip French version now keeps all mark sets settings.

Output
• 2599 DynaStrip PDF imposed flats are now identical to the raster preview for documents
containing certain types of edited PDF objects.
• 2616 A problem with the creep direction has been fixed.

For more technical information, please refer to the Release notes of DynaStrip 5.0.2.

Compatible with: Windows NT, 2000, XP

If you have version 4.4 and lower, you must purchase an upgrade. If you have DynaStrip 4.5 OR Network (floating licences), you must contact activation@dynagram.com BEFORE download (US & CAN). For international, please contact your distributor.

What is new in this release: DynaStrip 4.6.2 - Windows

• In JDF format, an inconsistency with bleed at the spine when the value is set to zero has been fixed.
• A time out problem with Hasp Time USB dongles has been resolved.
• Small fix to Hasp USB dongles using Evaluation licenses.
• A problem with the variable of the text tag in Separation color environment has been corrected.

Compatible with: Windows NT, 2000, XP

Si vous avez la version 4.4, vous devez acheter la mise à niveau. Si vous avez la version 4.5 OU la version Network (Licences flottantes), vous devez contacter activation@dynagram.com AVANT de télécharger cette nouvelle version.

What is new in this release: DynaStrip 4.6.2 - Windows

• En environnement JDF, un problème a été corrigé en rapport avec le fond perdu de la
gouttière du dos lorsqu’une valeur de zéro est appliquée.
• Un problème de cessation de détection de la clé de protection USB Hasp Time a été
résolu.
• Correction mineure à la clé USB Hasp utilisant des licences Évaluation.
• En environnement Séparations, un problème avec la variable <color> de la marque de
texte a été corrigé.

Compatible with: Windows NT, 2000, XP

If you have version 4.4 and lower, you must purchase an upgrade. If you have DynaStrip 4.5 OR Network (floating licences), you must contact activation@dynagram.com BEFORE download (US & CAN). For international, please contact your distributor.

What is new in this release: DynaStrip 4.6.2 - Windows

• In JDF format, an inconsistency with bleed at the spine when the value is set to zero has been fixed.
• A time out problem with Hasp Time USB dongles has been resolved.
• Small fix to Hasp USB dongles using Evaluation licenses.
• A problem with the variable of the text tag in Separation color environment has been corrected.

Compatible with: Windows NT, 2000, XP

If you have version 4.4 and lower, you must purchase an upgrade. If you have DynaStrip 4.5 OR Network (floating licences), you must contact activation@dynagram.com BEFORE download (US & CAN). For international, please contact your distributor.

What is new in this release: DynaStrip 4.6.2 - Windows

• In JDF format, an inconsistency with bleed at the spine when the value is set to zero has been fixed.
• A time out problem with Hasp Time USB dongles has been resolved.
• Small fix to Hasp USB dongles using Evaluation licenses.
• A problem with the variable of the text tag in Separation color environment has been corrected.

Compatible with: Windows NT, 2000, XP

(Hasp Network and License Manager) If you have version 4.4 and lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.5.2 Net - Windows

Linear marks are now properly positioned on back sheet at output.

Compatible with: Windows NT, 2000, XP

(Hasp Network and License Manager) If you have version 4.4 and lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.5.2 Net - Windows

Les marques linéaires sont maintenant positionnées correctement sur le verso à la sortie.

Compatible with: Windows NT, 2000, XP

(Hasp Network and License Manager) If you have version 4.4 and lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.5.2 Net - Windows

Linear marks are now properly positioned on back sheet at output.

Compatible with: Windows NT, 2000, XP

(Hasp Network and License Manager) If you have version 4.4 and lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.5.2 Net - Windows

Linear marks are now properly positioned on back sheet at output.

Compatible with: Windows NT, 2000, XP

(Rainbow or Hasp) If you have version 4.4 and lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.5.2 - Windows

Linear marks are now properly positioned on back sheet at output.

Compatible with: Windows NT, 2000, XP

(Rainbow or Hasp) If you have version 4.4 and lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.5.2 - Windows

Les marques linéaires sont maintenant positionnées correctement sur le verso à la sortie.

Compatible with: Windows NT, 2000, XP

(Rainbow or Hasp) If you have version 4.4 and lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.5.2 - Windows

Linear marks are now properly positioned on back sheet at output.

Compatible with: Windows NT, 2000, XP

(Rainbow or Hasp) If you have version 4.4 and lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.5.2 - Windows

Linear marks are now properly positioned on back sheet at output.

Compatible with: Windows 98/NT/2000/ME/XP

Users who integrate with a workflow that supports ArtBox, MediaBox, BleedBox, and TrimBox values do not need to upgrade to this version. If you have version 4.3 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.4.3 - Windows

In the Output Device Definition window, it is now possible to choose whether to add only MediaBox values or to include also ArtBox, TrimBox and BleedBox values at ouput for PDF, PJTF and JDF formats. By default, only the MediaBox is added to PDF, PJTF and JDF files at ouput.

Users who integrate with a workflow that supports ArtBox, MediaBox, BleedBox, and TrimBox values need not upgrade to this version.


Installation Instructions

1. Go to this folder on your computer C:\Program Files\Dynagram\DynaStrip4E
2. Make a copy of your DynaStrip4E folder and rename-it DynaStrip 442. You will have two folders: DynaStrip 4 and DynaStrip 442.
3. Delete these 2 files from the DynaStrip4E folder: DynaStrip.exe and DSResource.dll.
4. Unzip the DS443_WIN_English.zip archive.
5. Place the DynaStrip.exe and DSResource.dll files in the DynaStrip4E folder.
6. Start DynaStrip.exe

Compatible with: Windows 98/NT/2000/ME/XP

Users who integrate with a workflow that supports ArtBox, MediaBox, BleedBox, and TrimBox values need not upgrade to this version. If you have version 4.3 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.4.3 - Windows

In the Output Device Definition window, it is now possible to choose whether to add only MediaBox values or to include also ArtBox, TrimBox and BleedBox values at ouput for PDF, PJTF and JDF formats. By default, only the MediaBox is added to PDF, PJTF and JDF files at ouput.

Users who integrate with a workflow that supports ArtBox, MediaBox, BleedBox, and TrimBox values need not upgrade to this version.


Installation Instructions

1. Go to this folder on your computer C:\Program Files\Dynagram\DynaStrip4F
2. Make a copy of your DynaStrip4F folder and rename-it DynaStrip 442. You will have two folders: DynaStrip4F and DynaStrip 442.
3. Delete these 2 files from the DynaStrip4E folder: DynaStrip.exe and DSResource.dll.
4. Unzip the DS443_WIN_French.zip archive.
5. Place the DynaStrip.exe and DSResource.dll files in the DynaStrip4F folder.
6. Start DynaStrip.exe

Compatible with: Windows 98/NT/2000/ME/XP

Users who integrate with a workflow that supports ArtBox, MediaBox, BleedBox, and TrimBox values need not upgrade to this version. If you have version 4.3 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.4.3 - Windows

In the Output Device Definition window, it is now possible to choose whether to add only MediaBox values or to include also ArtBox, TrimBox and BleedBox values at ouput for PDF, PJTF and JDF formats. By default, only the MediaBox is added to PDF, PJTF and JDF files at ouput.

Users who integrate with a workflow that supports ArtBox, MediaBox, BleedBox, and TrimBox values need not upgrade to this version.


Installation Instructions

1. Go to this folder on your computer C:\Program Files\Dynagram\DynaStrip4S
2. Make a copy of your DynaStrip4S folder and rename-it DynaStrip 442. You will have two folders: DynaStrip4S and DynaStrip 442.
3. Delete these 2 files from the DynaStrip4S folder: DynaStrip.exe and DSResource.dll.
4. Unzip the DS443_WIN_Spanish.zip archive.
5. Place the DynaStrip.exe and DSResource.dll files in the DynaStrip4S folder.
6. Start DynaStrip.exe

Compatible with: Windows 98/NT/2000/ME/XP

Users who integrate with a workflow that supports ArtBox, MediaBox, BleedBox, and TrimBox values need not upgrade to this version. If you have version 4.3 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.4.3 - Windows

In the Output Device Definition window, it is now possible to choose whether to add only MediaBox values or to include also ArtBox, TrimBox and BleedBox values at ouput for PDF, PJTF and JDF formats. By default, only the MediaBox is added to PDF, PJTF and JDF files at ouput.

Users who integrate with a workflow that supports ArtBox, MediaBox, BleedBox, and TrimBox values need not upgrade to this version.


Installation Instructions

1. Go to this folder on your computer C:\Program Files\Dynagram\DynaStrip4G
2. Make a copy of your DynaStrip4G folder and rename-it DynaStrip 442. You will have two folders: DynaStrip4G and DynaStrip 442.
3. Delete these 2 files from the DynaStrip4G folder: DynaStrip.exe and DSResource.dll.
4. Unzip the DS443_WIN_German.zip archive.
5. Place the DynaStrip.exe and DSResource.dll files in the DynaStrip4G folder.
6. Start DynaStrip.exe

Compatible with: Windows 98/NT/2000/ME/XP

If you have version 4.3 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.4.2 - Windows

Increased application support including Acrobat® 7 and QuarkXPressTM 6.5

• DynaStrip 4.4 now supports Adobe Acrobat 7 (PDF 1.6), QuarkXPress 6.5, Adobe InDesign 3, and Corel Creative Suite 12.
• DynaStrip 4.4 also offers improved support for files created in Adobe Illustrator 6-10, InDesign 2, QuarkXpress, PageMaker 6.5, and Creo Export for Prepress.
• Enhanced compatibility with additional applications and versions.

Improved creep functions

• With version 4.4, creep settings have become more flexible and better adapted to the reality of the printing industry, giving user the ability to make very sophisticated adjustments.
• Creep can now be adjusted horizontally or vertically, making it easier to impose calendar jobs.
• Maximum creep value or paper thickness values can be used, along with a start value and the direction (push in and push out).

Centering of imported marks

• In order to comply with the widest range of optical readers and press requirements, imported marks such as color bars can be positioned and cropped either from the left or the centre of their placeholder. This is useful when a mark needs to be centered on the sheet precisely.

User-defined default settings

• In addition to existing object libraries, DynaStrip object parameters in their definition window can now be saved as defaults for all new jobs. This is useful to avoid re-setting the same parameters every time a new job is created. Each object definition window has a Save as default button that stores the settings in a file.
• These preferences can be set for sheets, signatures, pages, page marks, linear marks, register marks, collating marks, imported marks, density bars, text tags, distance tags, and tiling breaks.
• User-defined defaults for sheets, signatures, pages, page marks, and collating mark are pre-selected in DynaMo, speeding up job configuration.
• In the case of default parameters for signatures, page and page mark parameters will be overwritten by default parameters set from the Page Definition and Page Mark definition windows.

Enhanced support for Preps® templates

• DynaStrip’s support for Preps templates has been dramatically improved.
• DynaStrip now supports all signature types, independent pages, up to 30 sheets per template, page bleed and trim marks, imported marks, and Preps objects (exposure bars, collating marks, register marks, line marks, text marks, side guides, flat ID strings, rectangle marks, and fold marks).
• Even though the placement of objects in DynaStrip’s layout may display objects positioned over pages, all objects will be placed correctly at output.
• DynaStrip also supports Preps templates created from third-party applications Creo UpFront and Lithotechnics Metrix.

Tumble pagination sequences

• DynaStrip’s tumble feature is more comprehensive and allows pages, signatures, and all their attached objects to behave in a tumble manner on the light table.

• The tumble pagination option will take into account that the sheet will be flipped from top to bottom, instead of being flipped from right to left, in order to print the back. This is useful when working with perfecting presses.

Output file name support for JDF

• All JDF users can now customize their output file name using text and variables.

SMB network support

• DynaStrip for Macintosh can now use both AFP file services (Apple Filing Protocol) and SMB file services (Windows file sharing) network protocols. Files can be saved and accessed through either of the protocols.
• Files created through a protocol must keep using that same protocol. For example, an imposition job created and saved through SMB must be subsequently opened using the SMB network protocol.
• If a link towards a file (such as an imported mark) is created through a file system and open through another, the link will be broken.
• Mac OS supports SMB from OS X. We recommend using OS X 10.3 and later.

Compatible with: Windows 98/NT/2000/ME/XP

If you have version 4.3 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.4.2 - Windows

Increased application support including Acrobat® 7 and QuarkXPressTM 6.5

• DynaStrip 4.4 now supports Adobe Acrobat 7 (PDF 1.6), QuarkXPress 6.5, Adobe InDesign 3, and Corel Creative Suite 12.
• DynaStrip 4.4 also offers improved support for files created in Adobe Illustrator 6-10, InDesign 2, QuarkXpress, PageMaker 6.5, and Creo Export for Prepress.
• Enhanced compatibility with additional applications and versions.

Improved creep functions

• With version 4.4, creep settings have become more flexible and better adapted to the reality of the printing industry, giving user the ability to make very sophisticated adjustments.
• Creep can now be adjusted horizontally or vertically, making it easier to impose calendar jobs.
• Maximum creep value or paper thickness values can be used, along with a start value and the direction (push in and push out).

Centering of imported marks

• In order to comply with the widest range of optical readers and press requirements, imported marks such as color bars can be positioned and cropped either from the left or the centre of their placeholder. This is useful when a mark needs to be centered on the sheet precisely.

User-defined default settings

• In addition to existing object libraries, DynaStrip object parameters in their definition window can now be saved as defaults for all new jobs. This is useful to avoid re-setting the same parameters every time a new job is created. Each object definition window has a Save as default button that stores the settings in a file.
• These preferences can be set for sheets, signatures, pages, page marks, linear marks, register marks, collating marks, imported marks, density bars, text tags, distance tags, and tiling breaks.
• User-defined defaults for sheets, signatures, pages, page marks, and collating mark are pre-selected in DynaMo, speeding up job configuration.
• In the case of default parameters for signatures, page and page mark parameters will be overwritten by default parameters set from the Page Definition and Page Mark definition windows.

Enhanced support for Preps® templates

• DynaStrip’s support for Preps templates has been dramatically improved.
• DynaStrip now supports all signature types, independent pages, up to 30 sheets per template, page bleed and trim marks, imported marks, and Preps objects (exposure bars, collating marks, register marks, line marks, text marks, side guides, flat ID strings, rectangle marks, and fold marks).
• Even though the placement of objects in DynaStrip’s layout may display objects positioned over pages, all objects will be placed correctly at output.
• DynaStrip also supports Preps templates created from third-party applications Creo UpFront and Lithotechnics Metrix.

Tumble pagination sequences

• DynaStrip’s tumble feature is more comprehensive and allows pages, signatures, and all their attached objects to behave in a tumble manner on the light table.

• The tumble pagination option will take into account that the sheet will be flipped from top to bottom, instead of being flipped from right to left, in order to print the back. This is useful when working with perfecting presses.

Output file name support for JDF

• All JDF users can now customize their output file name using text and variables.

SMB network support

• DynaStrip for Macintosh can now use both AFP file services (Apple Filing Protocol) and SMB file services (Windows file sharing) network protocols. Files can be saved and accessed through either of the protocols.
• Files created through a protocol must keep using that same protocol. For example, an imposition job created and saved through SMB must be subsequently opened using the SMB network protocol.
• If a link towards a file (such as an imported mark) is created through a file system and open through another, the link will be broken.
• Mac OS supports SMB from OS X. We recommend using OS X 10.3 and later.

Compatible with: Windows 98/NT/2000/ME/XP

If you have version 4.3 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.4.2 - Windows

Increased application support including Acrobat® 7 and QuarkXPressTM 6.5

• DynaStrip 4.4 now supports Adobe Acrobat 7 (PDF 1.6), QuarkXPress 6.5, Adobe InDesign 3, and Corel Creative Suite 12.
• DynaStrip 4.4 also offers improved support for files created in Adobe Illustrator 6-10, InDesign 2, QuarkXpress, PageMaker 6.5, and Creo Export for Prepress.
• Enhanced compatibility with additional applications and versions.

Improved creep functions

• With version 4.4, creep settings have become more flexible and better adapted to the reality of the printing industry, giving user the ability to make very sophisticated adjustments.
• Creep can now be adjusted horizontally or vertically, making it easier to impose calendar jobs.
• Maximum creep value or paper thickness values can be used, along with a start value and the direction (push in and push out).

Centering of imported marks

• In order to comply with the widest range of optical readers and press requirements, imported marks such as color bars can be positioned and cropped either from the left or the centre of their placeholder. This is useful when a mark needs to be centered on the sheet precisely.

User-defined default settings

• In addition to existing object libraries, DynaStrip object parameters in their definition window can now be saved as defaults for all new jobs. This is useful to avoid re-setting the same parameters every time a new job is created. Each object definition window has a Save as default button that stores the settings in a file.
• These preferences can be set for sheets, signatures, pages, page marks, linear marks, register marks, collating marks, imported marks, density bars, text tags, distance tags, and tiling breaks.
• User-defined defaults for sheets, signatures, pages, page marks, and collating mark are pre-selected in DynaMo, speeding up job configuration.
• In the case of default parameters for signatures, page and page mark parameters will be overwritten by default parameters set from the Page Definition and Page Mark definition windows.

Enhanced support for Preps® templates

• DynaStrip’s support for Preps templates has been dramatically improved.
• DynaStrip now supports all signature types, independent pages, up to 30 sheets per template, page bleed and trim marks, imported marks, and Preps objects (exposure bars, collating marks, register marks, line marks, text marks, side guides, flat ID strings, rectangle marks, and fold marks).
• Even though the placement of objects in DynaStrip’s layout may display objects positioned over pages, all objects will be placed correctly at output.
• DynaStrip also supports Preps templates created from third-party applications Creo UpFront and Lithotechnics Metrix.

Tumble pagination sequences

• DynaStrip’s tumble feature is more comprehensive and allows pages, signatures, and all their attached objects to behave in a tumble manner on the light table.

• The tumble pagination option will take into account that the sheet will be flipped from top to bottom, instead of being flipped from right to left, in order to print the back. This is useful when working with perfecting presses.

Output file name support for JDF

• All JDF users can now customize their output file name using text and variables.

SMB network support

• DynaStrip for Macintosh can now use both AFP file services (Apple Filing Protocol) and SMB file services (Windows file sharing) network protocols. Files can be saved and accessed through either of the protocols.
• Files created through a protocol must keep using that same protocol. For example, an imposition job created and saved through SMB must be subsequently opened using the SMB network protocol.
• If a link towards a file (such as an imported mark) is created through a file system and open through another, the link will be broken.
• Mac OS supports SMB from OS X. We recommend using OS X 10.3 and later.

Compatible with: Windows 98/NT/2000/ME/XP

If you have version 4.3 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.4.2 - Windows

Increased application support including Acrobat® 7 and QuarkXPressTM 6.5

• DynaStrip 4.4 now supports Adobe Acrobat 7 (PDF 1.6), QuarkXPress 6.5, Adobe InDesign 3, and Corel Creative Suite 12.
• DynaStrip 4.4 also offers improved support for files created in Adobe Illustrator 6-10, InDesign 2, QuarkXpress, PageMaker 6.5, and Creo Export for Prepress.
• Enhanced compatibility with additional applications and versions.

Improved creep functions

• With version 4.4, creep settings have become more flexible and better adapted to the reality of the printing industry, giving user the ability to make very sophisticated adjustments.
• Creep can now be adjusted horizontally or vertically, making it easier to impose calendar jobs.
• Maximum creep value or paper thickness values can be used, along with a start value and the direction (push in and push out).

Centering of imported marks

• In order to comply with the widest range of optical readers and press requirements, imported marks such as color bars can be positioned and cropped either from the left or the centre of their placeholder. This is useful when a mark needs to be centered on the sheet precisely.

User-defined default settings

• In addition to existing object libraries, DynaStrip object parameters in their definition window can now be saved as defaults for all new jobs. This is useful to avoid re-setting the same parameters every time a new job is created. Each object definition window has a Save as default button that stores the settings in a file.
• These preferences can be set for sheets, signatures, pages, page marks, linear marks, register marks, collating marks, imported marks, density bars, text tags, distance tags, and tiling breaks.
• User-defined defaults for sheets, signatures, pages, page marks, and collating mark are pre-selected in DynaMo, speeding up job configuration.
• In the case of default parameters for signatures, page and page mark parameters will be overwritten by default parameters set from the Page Definition and Page Mark definition windows.

Enhanced support for Preps® templates

• DynaStrip’s support for Preps templates has been dramatically improved.
• DynaStrip now supports all signature types, independent pages, up to 30 sheets per template, page bleed and trim marks, imported marks, and Preps objects (exposure bars, collating marks, register marks, line marks, text marks, side guides, flat ID strings, rectangle marks, and fold marks).
• Even though the placement of objects in DynaStrip’s layout may display objects positioned over pages, all objects will be placed correctly at output.
• DynaStrip also supports Preps templates created from third-party applications Creo UpFront and Lithotechnics Metrix.

Tumble pagination sequences

• DynaStrip’s tumble feature is more comprehensive and allows pages, signatures, and all their attached objects to behave in a tumble manner on the light table.

• The tumble pagination option will take into account that the sheet will be flipped from top to bottom, instead of being flipped from right to left, in order to print the back. This is useful when working with perfecting presses.

Output file name support for JDF

• All JDF users can now customize their output file name using text and variables.

SMB network support

• DynaStrip for Macintosh can now use both AFP file services (Apple Filing Protocol) and SMB file services (Windows file sharing) network protocols. Files can be saved and accessed through either of the protocols.
• Files created through a protocol must keep using that same protocol. For example, an imposition job created and saved through SMB must be subsequently opened using the SMB network protocol.
• If a link towards a file (such as an imported mark) is created through a file system and open through another, the link will be broken.
• Mac OS supports SMB from OS X. We recommend using OS X 10.3 and later.

Compatible with: Windows 95/98/NT/2000/ME/XP

If you have version 4.2 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.3.2 - Windows

Complete with more JDF capabilities, automatic color matching and advanced pagination options, DynaStrip 4.3 continues to automate and accelerate the imposition process.

New Multi-Web and Partial Web Pagination

• DynaStrip now automatically paginates custom saddle-stitched jobs with any number of webs and partial webs. All partial web configurations (half-webs, quarter-webs, etc.) are supported in any number, at any sheet rank, and with any web position (gear side, operator side, et al.).
• This new algorithm also eases the pagination of multi-web templates. Pre-paginated booklets can then be stacked and page numbers incremented for the job. These comprehensive pagination options allow you to generate the perfect result when working in a multiple-web environment such as newspapers printing.

New JDF Transmission via HTTP Protocol at JDF Output

• In addition to hot folders for communicating JDF data, DynaStrip now features job file transmission via the HTTP protocol. A JDF file packaged in a MIME message is sent to an HTTP server during output. The status of the HTTP transfer received from the server is displayed on-screen and the details of the transmission are stored in a log file. This HTTP output fonctionality can be used in a local network environment, a wide-area network (WAN), or across the internet.

New Automatic Color Match

• Designed to automate the use of imported marks, the Automatic Color Matching preference allows DynaStrip to match the spot colors found in the imported mark (color bar, etc.) to the 5th or 6th colors of the job. The match can be viewed and overridden at any time in the color table.

• The Automatic Color Match is especially useful when used with the Job Ticket Flow tool because the same imported mark is “regenerated” at every new job output.

Extended Automation with Job Ticket Flow

• DynaStrip’s Job Ticket Flow module has been significantly improved with the ability to control the job creation from an external client or workflow system. DynaStrip is then used as an imposition engine that repeats the template according to the job parameters (binding, number of pages, creep, etc.) and outputs the imposed file without any user intervention.

Compatible with: Windows 95/98/NT/2000/ME/XP

If you have version 4.2 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.3.2 - Windows

Complete with more JDF capabilities, automatic color matching and advanced pagination options, DynaStrip 4.3 continues to automate and accelerate the imposition process.

New Multi-Web and Partial Web Pagination

• DynaStrip now automatically paginates custom saddle-stitched jobs with any number of webs and partial webs. All partial web configurations (half-webs, quarter-webs, etc.) are supported in any number, at any sheet rank, and with any web position (gear side, operator side, et al.).
• This new algorithm also eases the pagination of multi-web templates. Pre-paginated booklets can then be stacked and page numbers incremented for the job. These comprehensive pagination options allow you to generate the perfect result when working in a multiple-web environment such as newspapers printing.

New JDF Transmission via HTTP Protocol at JDF Output

• In addition to hot folders for communicating JDF data, DynaStrip now features job file transmission via the HTTP protocol. A JDF file packaged in a MIME message is sent to an HTTP server during output. The status of the HTTP transfer received from the server is displayed on-screen and the details of the transmission are stored in a log file. This HTTP output fonctionality can be used in a local network environment, a wide-area network (WAN), or across the internet.

New Automatic Color Match

• Designed to automate the use of imported marks, the Automatic Color Matching preference allows DynaStrip to match the spot colors found in the imported mark (color bar, etc.) to the 5th or 6th colors of the job. The match can be viewed and overridden at any time in the color table.

• The Automatic Color Match is especially useful when used with the Job Ticket Flow tool because the same imported mark is “regenerated” at every new job output.

Extended Automation with Job Ticket Flow

• DynaStrip’s Job Ticket Flow module has been significantly improved with the ability to control the job creation from an external client or workflow system. DynaStrip is then used as an imposition engine that repeats the template according to the job parameters (binding, number of pages, creep, etc.) and outputs the imposed file without any user intervention.

Compatible with: Windows 95/98/NT/2000/ME/XP

If you have version 4.2 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.3.2 - Windows

Complete with more JDF capabilities, automatic color matching and advanced pagination options, DynaStrip 4.3 continues to automate and accelerate the imposition process.

New Multi-Web and Partial Web Pagination

• DynaStrip now automatically paginates custom saddle-stitched jobs with any number of webs and partial webs. All partial web configurations (half-webs, quarter-webs, etc.) are supported in any number, at any sheet rank, and with any web position (gear side, operator side, et al.).
• This new algorithm also eases the pagination of multi-web templates. Pre-paginated booklets can then be stacked and page numbers incremented for the job. These comprehensive pagination options allow you to generate the perfect result when working in a multiple-web environment such as newspapers printing.

New JDF Transmission via HTTP Protocol at JDF Output

• In addition to hot folders for communicating JDF data, DynaStrip now features job file transmission via the HTTP protocol. A JDF file packaged in a MIME message is sent to an HTTP server during output. The status of the HTTP transfer received from the server is displayed on-screen and the details of the transmission are stored in a log file. This HTTP output fonctionality can be used in a local network environment, a wide-area network (WAN), or across the internet.

New Automatic Color Match

• Designed to automate the use of imported marks, the Automatic Color Matching preference allows DynaStrip to match the spot colors found in the imported mark (color bar, etc.) to the 5th or 6th colors of the job. The match can be viewed and overridden at any time in the color table.

• The Automatic Color Match is especially useful when used with the Job Ticket Flow tool because the same imported mark is “regenerated” at every new job output.

Extended Automation with Job Ticket Flow

• DynaStrip’s Job Ticket Flow module has been significantly improved with the ability to control the job creation from an external client or workflow system. DynaStrip is then used as an imposition engine that repeats the template according to the job parameters (binding, number of pages, creep, etc.) and outputs the imposed file without any user intervention.

Compatible with: Windows 95/98/NT/2000/ME/XP

If you have version 4.2 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.3.2 - Windows

Complete with more JDF capabilities, automatic color matching and advanced pagination options, DynaStrip 4.3 continues to automate and accelerate the imposition process.

New Multi-Web and Partial Web Pagination

• DynaStrip now automatically paginates custom saddle-stitched jobs with any number of webs and partial webs. All partial web configurations (half-webs, quarter-webs, etc.) are supported in any number, at any sheet rank, and with any web position (gear side, operator side, et al.).
• This new algorithm also eases the pagination of multi-web templates. Pre-paginated booklets can then be stacked and page numbers incremented for the job. These comprehensive pagination options allow you to generate the perfect result when working in a multiple-web environment such as newspapers printing.

New JDF Transmission via HTTP Protocol at JDF Output

• In addition to hot folders for communicating JDF data, DynaStrip now features job file transmission via the HTTP protocol. A JDF file packaged in a MIME message is sent to an HTTP server during output. The status of the HTTP transfer received from the server is displayed on-screen and the details of the transmission are stored in a log file. This HTTP output fonctionality can be used in a local network environment, a wide-area network (WAN), or across the internet.

New Automatic Color Match

• Designed to automate the use of imported marks, the Automatic Color Matching preference allows DynaStrip to match the spot colors found in the imported mark (color bar, etc.) to the 5th or 6th colors of the job. The match can be viewed and overridden at any time in the color table.

• The Automatic Color Match is especially useful when used with the Job Ticket Flow tool because the same imported mark is “regenerated” at every new job output.

Extended Automation with Job Ticket Flow

• DynaStrip’s Job Ticket Flow module has been significantly improved with the ability to control the job creation from an external client or workflow system. DynaStrip is then used as an imposition engine that repeats the template according to the job parameters (binding, number of pages, creep, etc.) and outputs the imposed file without any user intervention.

Compatible with: Windows 95/98/NT/2000/ME/XP

If you have version 4.1 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.2.1 - Windows

DynaStrip 4.2 creates flexible JDF 1.1 or 1.2 imposition plans which can be used as job templates in various workflows. DynaStrip 4.2 also offers a number of new JDF settings for job definition and output to ensure seamless integration with JDF systems.

New JDF Data

• Stock customer information in each job.
• Easily create and identify imposition templates for future use.
• Define Print Production Data (work style, printing type, paper profile, etc.) and override defaults on specific sheets.

New JDF Output Options

• Select JDF version 1.1 or 1.2 for workflow compatibility.
• Select PDF version 1.3, 1.4 or 1.5 for marks.
• Communicate using MIME encoding or output separate files.
• Choose relative or absolute file paths for referred PDF files.
• Copy and create subfolders for PDF files.
• Tag missing source pages as unavailable.
• Tag PDF source documents and marks files for disposition after processing.
• Quickly identify JDF files with the new file icon designed by CIP4.
• All DynaStrip 4.2 users will benefit from the new practical pagination and job assembly features.

Multiple Sheet Templates

• With DynaStrip 4.2, users are no longer limited to single sheet templates. They can save a template with any number of selected sheets and load them as signatures or job sections for faster job creation.
  

Pagination Sequence Attribution

• When importing a template, a new dialog prompts the user to attribute a pagination sequence to each imported signature.
  

Linkage of Pagination Sequences

• For Creep Only binding style, new pagination increment options are offered while keeping the folding pattern intact across the entire pagination sequence. The user can now continue page numbering from previous sequence or to increment pagination automatically based on the First page number field. Coupled with multiple-sheet templates, this feature allows for easier multi-web and complex job pagination.
  

Group Pagination Sequences at Output

• DynaStrip users may now group and identify imposition files based on pagination sequences. For example, a multi-web job containing three consecutive pagination sequences would produce three output files.
  

Better User Guidance for Pagination

• A warning will appear every time an action risks overriding a manual pagination.
• The Signature mode now houses a paginate action (previously only in Page mode).
• The manual pagination dialog is now a floating palette.The Multi-web menu has been clarified for “Cut in half” pagination.

Compatible with: Windows 95/98/NT/2000/ME/XP

Patch for Apogee and Prinergy users only. If you have version 4.1 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.2.1 - Windows

IMPORTANT: Please carefully read the instructions below before downloading this patch.

Due to a change in the multiple delivery (ganging of job) in DynaStrip 4.1.x and higher, customers that work in a PJTF and JDF environment will need to download a patch to ensure optimum compatibility between the DynaStrip imposition software and the Apogee X and Prinergy workflows.

If you are a 4.1.X user with the Apogee X or Prinergy workflow

• Upgrade your 4.1.x version to 4.2.1. Please contact sales@dynagram.com for more information.
• Download the DynaStrip 4.2.1C patch.
• Go to the Hard drive/Program Files/Dynagram/DynaStrip application folder and remove the DynaStrip executable that is already present in the application folder.
• Take the DynaStrip 4.2.1C patch and copy it in the DynaStrip application folder.
• Restart DynaStrip.

If you are a DynaStrip 4.2.1 user with the Apogee X or Prinergy workflow

• Download the DynaStrip 4.2.1C patch.
• Go to the Hard drive/Program Files/Dynagram/DynaStrip application folder and remove the DynaStrip executable that is already present in the application folder.
• Take the DynaStrip 4.2.1C patch an copy it in the DynaStrip application folder.
• Restart DynaStrip.

Compatible with: Windows 95/98/NT/2000/ME/XP

If you have version 4.1 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.2.1 - Windows

DynaStrip 4.2 creates flexible JDF 1.1 or 1.2 imposition plans which can be used as job templates in various workflows. DynaStrip 4.2 also offers a number of new JDF settings for job definition and output to ensure seamless integration with JDF systems.

New JDF Data

• Stock customer information in each job.
• Easily create and identify imposition templates for future use.
• Define Print Production Data (work style, printing type, paper profile, etc.) and override defaults on specific sheets.

New JDF Output Options

• Select JDF version 1.1 or 1.2 for workflow compatibility.
• Select PDF version 1.3, 1.4 or 1.5 for marks.
• Communicate using MIME encoding or output separate files.
• Choose relative or absolute file paths for referred PDF files.
• Copy and create subfolders for PDF files.
• Tag missing source pages as unavailable.
• Tag PDF source documents and marks files for disposition after processing.
• Quickly identify JDF files with the new file icon designed by CIP4.
• All DynaStrip 4.2 users will benefit from the new practical pagination and job assembly features.

Multiple Sheet Templates

• With DynaStrip 4.2, users are no longer limited to single sheet templates. They can save a template with any number of selected sheets and load them as signatures or job sections for faster job creation.
  

Pagination Sequence Attribution

• When importing a template, a new dialog prompts the user to attribute a pagination sequence to each imported signature.
  

Linkage of Pagination Sequences

• For Creep Only binding style, new pagination increment options are offered while keeping the folding pattern intact across the entire pagination sequence. The user can now continue page numbering from previous sequence or to increment pagination automatically based on the First page number field. Coupled with multiple-sheet templates, this feature allows for easier multi-web and complex job pagination.
  

Group Pagination Sequences at Output

• DynaStrip users may now group and identify imposition files based on pagination sequences. For example, a multi-web job containing three consecutive pagination sequences would produce three output files.
  

Better User Guidance for Pagination

• A warning will appear every time an action risks overriding a manual pagination.
• The Signature mode now houses a paginate action (previously only in Page mode).
• The manual pagination dialog is now a floating palette.The Multi-web menu has been clarified for “Cut in half” pagination.

Compatible with: Windows 95/98/NT/2000/ME/XP

Patch for Apogee and Prinergy users only. If you have version 4.1 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.2.1 - Windows

IMPORTANT: Please carefully read the instructions below before downloading this patch.

Due to a change in the multiple delivery (ganging of job) in DynaStrip 4.1.x and higher, customers that work in a PJTF and JDF environment will need to download a patch to ensure optimum compatibility between the DynaStrip imposition software and the Apogee X and Prinergy workflows.

If you are a 4.1.X user with the Apogee X or Prinergy workflow

• Upgrade your 4.1.x version to 4.2.1. Please contact sales@dynagram.com for more information.
• Download the DynaStrip 4.2.1C patch.
• Go to the Hard drive/Program Files/Dynagram/DynaStrip application folder and remove the DynaStrip executable that is already present in the application folder.
• Take the DynaStrip 4.2.1C patch and copy it in the DynaStrip application folder.
• Restart DynaStrip.

If you are a DynaStrip 4.2.1 user with the Apogee X or Prinergy workflow

• Download the DynaStrip 4.2.1C patch.
• Go to the Hard drive/Program Files/Dynagram/DynaStrip application folder and remove the DynaStrip executable that is already present in the application folder.
• Take the DynaStrip 4.2.1C patch an copy it in the DynaStrip application folder.
• Restart DynaStrip.

Compatible with: Windows 95/98/NT/2000/ME/XP

If you have version 4.1 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.2.1 - Windows

DynaStrip 4.2 creates flexible JDF 1.1 or 1.2 imposition plans which can be used as job templates in various workflows. DynaStrip 4.2 also offers a number of new JDF settings for job definition and output to ensure seamless integration with JDF systems.

New JDF Data

• Stock customer information in each job.
• Easily create and identify imposition templates for future use.
• Define Print Production Data (work style, printing type, paper profile, etc.) and override defaults on specific sheets.

New JDF Output Options

• Select JDF version 1.1 or 1.2 for workflow compatibility.
• Select PDF version 1.3, 1.4 or 1.5 for marks.
• Communicate using MIME encoding or output separate files.
• Choose relative or absolute file paths for referred PDF files.
• Copy and create subfolders for PDF files.
• Tag missing source pages as unavailable.
• Tag PDF source documents and marks files for disposition after processing.
• Quickly identify JDF files with the new file icon designed by CIP4.
• All DynaStrip 4.2 users will benefit from the new practical pagination and job assembly features.

Multiple Sheet Templates

• With DynaStrip 4.2, users are no longer limited to single sheet templates. They can save a template with any number of selected sheets and load them as signatures or job sections for faster job creation.
  

Pagination Sequence Attribution

• When importing a template, a new dialog prompts the user to attribute a pagination sequence to each imported signature.
  

Linkage of Pagination Sequences

• For Creep Only binding style, new pagination increment options are offered while keeping the folding pattern intact across the entire pagination sequence. The user can now continue page numbering from previous sequence or to increment pagination automatically based on the First page number field. Coupled with multiple-sheet templates, this feature allows for easier multi-web and complex job pagination.
  

Group Pagination Sequences at Output

• DynaStrip users may now group and identify imposition files based on pagination sequences. For example, a multi-web job containing three consecutive pagination sequences would produce three output files.
  

Better User Guidance for Pagination

• A warning will appear every time an action risks overriding a manual pagination.
• The Signature mode now houses a paginate action (previously only in Page mode).
• The manual pagination dialog is now a floating palette.The Multi-web menu has been clarified for “Cut in half” pagination.

Compatible with: Windows 95/98/NT/2000/ME/XP

Patch for Apogee and Prinergy users only. If you have version 4.1 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.2.1 - Windows

IMPORTANT: Please carefully read the instructions below before downloading this patch.

Due to a change in the multiple delivery (ganging of job) in DynaStrip 4.1.x and higher, customers that work in a PJTF and JDF environment will need to download a patch to ensure optimum compatibility between the DynaStrip imposition software and the Apogee X and Prinergy workflows.

If you are a 4.1.X user with the Apogee X or Prinergy workflow

• Upgrade your 4.1.x version to 4.2.1. Please contact sales@dynagram.com for more information.
• Download the DynaStrip 4.2.1C patch.
• Go to the Hard drive/Program Files/Dynagram/DynaStrip application folder and remove the DynaStrip executable that is already present in the application folder.
• Take the DynaStrip 4.2.1C patch and copy it in the DynaStrip application folder.
• Restart DynaStrip.

If you are a DynaStrip 4.2.1 user with the Apogee X or Prinergy workflow

• Download the DynaStrip 4.2.1C patch.
• Go to the Hard drive/Program Files/Dynagram/DynaStrip application folder and remove the DynaStrip executable that is already present in the application folder.
• Take the DynaStrip 4.2.1C patch an copy it in the DynaStrip application folder.
• Restart DynaStrip.

Compatible with: Windows 95/98/NT/2000/ME/XP

If you have version 4.1 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.2.1 - Windows

DynaStrip 4.2 creates flexible JDF 1.1 or 1.2 imposition plans which can be used as job templates in various workflows. DynaStrip 4.2 also offers a number of new JDF settings for job definition and output to ensure seamless integration with JDF systems.

New JDF Data

• Stock customer information in each job.
• Easily create and identify imposition templates for future use.
• Define Print Production Data (work style, printing type, paper profile, etc.) and override defaults on specific sheets.

New JDF Output Options

• Select JDF version 1.1 or 1.2 for workflow compatibility.
• Select PDF version 1.3, 1.4 or 1.5 for marks.
• Communicate using MIME encoding or output separate files.
• Choose relative or absolute file paths for referred PDF files.
• Copy and create subfolders for PDF files.
• Tag missing source pages as unavailable.
• Tag PDF source documents and marks files for disposition after processing.
• Quickly identify JDF files with the new file icon designed by CIP4.
• All DynaStrip 4.2 users will benefit from the new practical pagination and job assembly features.

Multiple Sheet Templates

• With DynaStrip 4.2, users are no longer limited to single sheet templates. They can save a template with any number of selected sheets and load them as signatures or job sections for faster job creation.
  

Pagination Sequence Attribution

• When importing a template, a new dialog prompts the user to attribute a pagination sequence to each imported signature.
  

Linkage of Pagination Sequences

• For Creep Only binding style, new pagination increment options are offered while keeping the folding pattern intact across the entire pagination sequence. The user can now continue page numbering from previous sequence or to increment pagination automatically based on the First page number field. Coupled with multiple-sheet templates, this feature allows for easier multi-web and complex job pagination.
  

Group Pagination Sequences at Output

• DynaStrip users may now group and identify imposition files based on pagination sequences. For example, a multi-web job containing three consecutive pagination sequences would produce three output files.
  

Better User Guidance for Pagination

• A warning will appear every time an action risks overriding a manual pagination.
• The Signature mode now houses a paginate action (previously only in Page mode).
• The manual pagination dialog is now a floating palette.The Multi-web menu has been clarified for “Cut in half” pagination.

Compatible with: Windows 95/98/NT/2000/ME/XP

Patch for Apogee and Prinergy users only. If you have version 4.1 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.2.1 - Windows

IMPORTANT: Please carefully read the instructions below before downloading this patch.

Due to a change in the multiple delivery (ganging of job) in DynaStrip 4.1.x and higher, customers that work in a PJTF and JDF environment will need to download a patch to ensure optimum compatibility between the DynaStrip imposition software and the Apogee X and Prinergy workflows.

If you are a 4.1.X user with the Apogee X or Prinergy workflow

• Upgrade your 4.1.x version to 4.2.1. Please contact sales@dynagram.com for more information.
• Download the DynaStrip 4.2.1C patch.
• Go to the Hard drive/Program Files/Dynagram/DynaStrip application folder and remove the DynaStrip executable that is already present in the application folder.
• Take the DynaStrip 4.2.1C patch and copy it in the DynaStrip application folder.
• Restart DynaStrip.

If you are a DynaStrip 4.2.1 user with the Apogee X or Prinergy workflow

• Download the DynaStrip 4.2.1C patch.
• Go to the Hard drive/Program Files/Dynagram/DynaStrip application folder and remove the DynaStrip executable that is already present in the application folder.
• Take the DynaStrip 4.2.1C patch an copy it in the DynaStrip application folder.
• Restart DynaStrip.

Compatible with: Windows 95/98/NT/2000/ME/XP

If you have version 4.0 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.1.1 - Windows

Enhanced support for JDF
As an active member of the CIP4 organization, Dynagram has made significant development efforts to make sure its product aligns with the upcoming version 1.2 of the JDF standard. In fact, end users can already benefit from new JDF functions in DynaStrip 4.1.1.

• DynaStrip 4.1.1 creates more flexible JDF imposition templates which can be used repeatedly with various JDF workflow systems.
• JDF output mode supports any type of job ganging: multiple pagination sequences, multiple document lists, as well as step & repeat signatures.

Enhanced support for PJTF

• PJTF output mode supports any type of job ganging: multiple pagination sequences, multiple document lists, as well as step & repeat signatures.

New layout objects and functions

• A new specific Fold mark object has been added to the Gutters dialog. It allows for the easier creation and placement of fold marks in a gutter by dividing the space between pages evenly or with an assymetric value. Any excess bleed from adjacent pages is limited to the fold mark.
• In order to better satisfy the demands of the packaging industry, DynaStrip 4.1.1 now accepts upto 40 colors in all its color layer dialogs.
• Page marks can now be displayed in all gutters for commercial jobs. This function is also found among the Step & Repeat options in the Signature Definition dialog.
• An option for independent sheet side pagination is now included. Simply use a text file to create a non-mirror pagination.
• Automatic creep calculation using Paper thickness: use this added feature to calculate the maximum creep adjustment.
• Two text tag variables have been created for file name and folder name. When attached to a page, these variables will replace it with the corresponding source document file or folder name.

Interface goodies

• Convenient tooltips have been added to all DynaStrip icons. Simply place the cursor on the icon and its function appears.
• Standard Revert & Save As options have been added to the File menu. The Revert option allows you to return to the job as it was when it was last saved, discarding all changes.
• The DynaStrip Help menu now offers links to useful PDF documents as well as to the main DynaStrip pages of the Dynagram website.

Compatible with: Windows 95/98/NT/2000/ME/XP

If you have version 4.0 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.1.1 - Windows

Enhanced support for JDF
As an active member of the CIP4 organization, Dynagram has made significant development efforts to make sure its product aligns with the upcoming version 1.2 of the JDF standard. In fact, end users can already benefit from new JDF functions in DynaStrip 4.1.1.

• DynaStrip 4.1.1 creates more flexible JDF imposition templates which can be used repeatedly with various JDF workflow systems.
• JDF output mode supports any type of job ganging: multiple pagination sequences, multiple document lists, as well as step & repeat signatures.

Enhanced support for PJTF

• PJTF output mode supports any type of job ganging: multiple pagination sequences, multiple document lists, as well as step & repeat signatures.

New layout objects and functions

• A new specific Fold mark object has been added to the Gutters dialog. It allows for the easier creation and placement of fold marks in a gutter by dividing the space between pages evenly or with an assymetric value. Any excess bleed from adjacent pages is limited to the fold mark.
• In order to better satisfy the demands of the packaging industry, DynaStrip 4.1.1 now accepts upto 40 colors in all its color layer dialogs.
• Page marks can now be displayed in all gutters for commercial jobs. This function is also found among the Step & Repeat options in the Signature Definition dialog.
• An option for independent sheet side pagination is now included. Simply use a text file to create a non-mirror pagination.
• Automatic creep calculation using Paper thickness: use this added feature to calculate the maximum creep adjustment.
• Two text tag variables have been created for file name and folder name. When attached to a page, these variables will replace it with the corresponding source document file or folder name.

Interface goodies

• Convenient tooltips have been added to all DynaStrip icons. Simply place the cursor on the icon and its function appears.
• Standard Revert & Save As options have been added to the File menu. The Revert option allows you to return to the job as it was when it was last saved, discarding all changes.
• The DynaStrip Help menu now offers links to useful PDF documents as well as to the main DynaStrip pages of the Dynagram website.

Compatible with: Windows 95/98/NT/2000/ME/XP

If you have version 4.0 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.1.1 - Windows

Enhanced support for JDF
As an active member of the CIP4 organization, Dynagram has made significant development efforts to make sure its product aligns with the upcoming version 1.2 of the JDF standard. In fact, end users can already benefit from new JDF functions in DynaStrip 4.1.1.

• DynaStrip 4.1.1 creates more flexible JDF imposition templates which can be used repeatedly with various JDF workflow systems.
• JDF output mode supports any type of job ganging: multiple pagination sequences, multiple document lists, as well as step & repeat signatures.

Enhanced support for PJTF

• PJTF output mode supports any type of job ganging: multiple pagination sequences, multiple document lists, as well as step & repeat signatures.

New layout objects and functions

• A new specific Fold mark object has been added to the Gutters dialog. It allows for the easier creation and placement of fold marks in a gutter by dividing the space between pages evenly or with an assymetric value. Any excess bleed from adjacent pages is limited to the fold mark.
• In order to better satisfy the demands of the packaging industry, DynaStrip 4.1.1 now accepts upto 40 colors in all its color layer dialogs.
• Page marks can now be displayed in all gutters for commercial jobs. This function is also found among the Step & Repeat options in the Signature Definition dialog.
• An option for independent sheet side pagination is now included. Simply use a text file to create a non-mirror pagination.
• Automatic creep calculation using Paper thickness: use this added feature to calculate the maximum creep adjustment.
• Two text tag variables have been created for file name and folder name. When attached to a page, these variables will replace it with the corresponding source document file or folder name.

Interface goodies

• Convenient tooltips have been added to all DynaStrip icons. Simply place the cursor on the icon and its function appears.
• Standard Revert & Save As options have been added to the File menu. The Revert option allows you to return to the job as it was when it was last saved, discarding all changes.
• The DynaStrip Help menu now offers links to useful PDF documents as well as to the main DynaStrip pages of the Dynagram website.

Compatible with: Windows 95/98/NT/2000/ME/XP

If you have version 4.0 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.1.1 - Windows

Enhanced support for JDF
As an active member of the CIP4 organization, Dynagram has made significant development efforts to make sure its product aligns with the upcoming version 1.2 of the JDF standard. In fact, end users can already benefit from new JDF functions in DynaStrip 4.1.1.

• DynaStrip 4.1.1 creates more flexible JDF imposition templates which can be used repeatedly with various JDF workflow systems.
• JDF output mode supports any type of job ganging: multiple pagination sequences, multiple document lists, as well as step & repeat signatures.

Enhanced support for PJTF

• PJTF output mode supports any type of job ganging: multiple pagination sequences, multiple document lists, as well as step & repeat signatures.

New layout objects and functions

• A new specific Fold mark object has been added to the Gutters dialog. It allows for the easier creation and placement of fold marks in a gutter by dividing the space between pages evenly or with an assymetric value. Any excess bleed from adjacent pages is limited to the fold mark.
• In order to better satisfy the demands of the packaging industry, DynaStrip 4.1.1 now accepts upto 40 colors in all its color layer dialogs.
• Page marks can now be displayed in all gutters for commercial jobs. This function is also found among the Step & Repeat options in the Signature Definition dialog.
• An option for independent sheet side pagination is now included. Simply use a text file to create a non-mirror pagination.
• Automatic creep calculation using Paper thickness: use this added feature to calculate the maximum creep adjustment.
• Two text tag variables have been created for file name and folder name. When attached to a page, these variables will replace it with the corresponding source document file or folder name.

Interface goodies

• Convenient tooltips have been added to all DynaStrip icons. Simply place the cursor on the icon and its function appears.
• Standard Revert & Save As options have been added to the File menu. The Revert option allows you to return to the job as it was when it was last saved, discarding all changes.
• The DynaStrip Help menu now offers links to useful PDF documents as well as to the main DynaStrip pages of the Dynagram website.

Compatible with: Windows 95/98/NT/2000/ME/XP

What is new in this release: DynaStrip 4.0.4 - Windows

Direct-layout PDF preview (Acrobat® 4.0+ required)

• The Raster Mode function can be used to display PDF pages directly in DynaStrip design window. The PDF preview offers the ability to customize the imposition layout based on the page content (example: bleed, crossover images, superimpositon of pages, etc.).
• When clicking on the Raster Mode icon, PDF pages (not thumbnails) show up in the imposition layout, allowing for accurate proofing even when zooming at any percentage.

Special spot color for Outline trim boxes

• DynaStrip has printing options for outline page trims that can be used for imposition proofing or layout only. Outline page trims now use a special color layer called DSOutline. Outlines do not print on other color plates. Therefore, output files created for proofing can also be used for final imaging (ROOM).
• DSOutline color definition can be customized using CMYK colors in the Preferences dialog box. The default color is red (100% Magenta + 100% Yellow).

Ability to place imported marks on a network server (multi-station installations)

• Imported mark definition and adjustment files are saved in the DynaStrip:Marks folder by default. Users can also choose a new folder in the Preferences dialog box.
• When sharing imported mark, it is important to keep the image intact on the server. Any modification in the Image Linker window would affect all jobs using this image. The image size can be changed for a specific job in the Imported Mark Definition window. The "Use this size" option will crop or repeat the image to automatically fill up the entire defined area.
• IMPORTANT NOTE: To use the shared Marks folder, open or create a job, then go to Preferences and link the Marks folder to a folder on the network. For easier use, we recommend that image files (EPS, PDF, etc.) be located in a sub-folder inside the Marks folder.

JDF output mode

• Exporting a job from DynaStrip in JDF format produces two files: an imposition plan using the CIP4 Job Definition Format standard, plus a PDF file for imposition marks. This release of DynaStrip implements generic JDF imposition plans that may have to be more closely integrated with specific workflow systems.

New application icons

• DynaStrip 4.0 features new application and document icons. The main icon represents the encompassing stroke of DynaStrip logo and uses the product package background and colors. All tools icons in the application have also been upgraded to allow for background transparency.

PDF trapping annotations (Trap Network) imposition

• DynaStrip 4.0 offers the ability to impose PDF 1.3 trap network annotations used by Adobe® Extreme® PDF Trapper technology.
• About Trapper technology: When trapping a PDF file in an Extreme® system, the user specifies trapping controls in PJTF. The trapping is executed by the PDF Trapper technology, which generates the traps and stores them as a special annotation in the PDF file. The PDF file can then be printed to the Adobe Printer Job Ticket Processor or an Adobe PostScript 3 RIP. Users can view the trapped PDF file in Acrobat.

New PDF filter

• A new PDF filter detects PDF type (PDF1.3, PDF1.4, PDF/X, securized PDF files, etc.). After PDF document pages are updated in the Document list, the PDF type appears in the list for each file. If the filter encounters a secure or encrypted PDF file, the error message "SEC" displays in the list. The filter also permits PDF pages with a TrimBox definition or without proper cropping information to center automatically in DynaStrip pages.

PDF Output Device configuration for PDF 1.3 or 1.4 creation

• In the Configuration drop down menu of the Output Device Definition window, options are now available for PDF1.3 or PDF1.4. The selected PDF version number will be reflected in PDF imposition files in order to comply with output device’s specifications.

Populated PJTF (Windows only)

• JT imposition plans can now be populated with source files. The user simply has to index PDF files in the Document List & Imposition Index dialog, and output in PJTF mode as usual.

New support for EFI Velocity OneFlow®

• Job Tickets generated by DynaStrip 4.0 are now compatible with EFI Velocity OneFlow workflow system using PJTF output format. On DynaStrip 4.0 for Windows, imposition plans can also be populated with PDF files and benefit from direct-layout PDF page preview.

Compatible with: Windows 95/98/NT/2000/ME/XP

If you have version 3.5 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.0.4 - Windows

Direct-layout PDF preview (Acrobat® 4.0+ required)

• The Raster Mode function can be used to display PDF pages directly in DynaStrip design window. The PDF preview offers the ability to customize the imposition layout based on the page content (example: bleed, crossover images, superimpositon of pages, etc.).
• When clicking on the Raster Mode icon, PDF pages (not thumbnails) show up in the imposition layout, allowing for accurate proofing even when zooming at any percentage.

Special spot color for Outline trim boxes

• DynaStrip has printing options for outline page trims that can be used for imposition proofing or layout only. Outline page trims now use a special color layer called DSOutline. Outlines do not print on other color plates. Therefore, output files created for proofing can also be used for final imaging (ROOM).
• DSOutline color definition can be customized using CMYK colors in the Preferences dialog box. The default color is red (100% Magenta + 100% Yellow).

Ability to place imported marks on a network server (multi-station installations)

• Imported mark definition and adjustment files are saved in the DynaStrip:Marks folder by default. Users can also choose a new folder in the Preferences dialog box.
• When sharing imported mark, it is important to keep the image intact on the server. Any modification in the Image Linker window would affect all jobs using this image. The image size can be changed for a specific job in the Imported Mark Definition window. The "Use this size" option will crop or repeat the image to automatically fill up the entire defined area.
• IMPORTANT NOTE: To use the shared Marks folder, open or create a job, then go to Preferences and link the Marks folder to a folder on the network. For easier use, we recommend that image files (EPS, PDF, etc.) be located in a sub-folder inside the Marks folder.

JDF output mode

• Exporting a job from DynaStrip in JDF format produces two files: an imposition plan using the CIP4 Job Definition Format standard, plus a PDF file for imposition marks. This release of DynaStrip implements generic JDF imposition plans that may have to be more closely integrated with specific workflow systems.

New application icons

• DynaStrip 4.0 features new application and document icons. The main icon represents the encompassing stroke of DynaStrip logo and uses the product package background and colors. All tools icons in the application have also been upgraded to allow for background transparency.

PDF trapping annotations (Trap Network) imposition

• DynaStrip 4.0 offers the ability to impose PDF 1.3 trap network annotations used by Adobe® Extreme® PDF Trapper technology.
• About Trapper technology: When trapping a PDF file in an Extreme® system, the user specifies trapping controls in PJTF. The trapping is executed by the PDF Trapper technology, which generates the traps and stores them as a special annotation in the PDF file. The PDF file can then be printed to the Adobe Printer Job Ticket Processor or an Adobe PostScript 3 RIP. Users can view the trapped PDF file in Acrobat.

New PDF filter

• A new PDF filter detects PDF type (PDF1.3, PDF1.4, PDF/X, securized PDF files, etc.). After PDF document pages are updated in the Document list, the PDF type appears in the list for each file. If the filter encounters a secure or encrypted PDF file, the error message "SEC" displays in the list. The filter also permits PDF pages with a TrimBox definition or without proper cropping information to center automatically in DynaStrip pages.

PDF Output Device configuration for PDF 1.3 or 1.4 creation

• In the Configuration drop down menu of the Output Device Definition window, options are now available for PDF1.3 or PDF1.4. The selected PDF version number will be reflected in PDF imposition files in order to comply with output device’s specifications.

Populated PJTF (Windows only)

• JT imposition plans can now be populated with source files. The user simply has to index PDF files in the Document List & Imposition Index dialog, and output in PJTF mode as usual.

New support for EFI Velocity OneFlow®

• Job Tickets generated by DynaStrip 4.0 are now compatible with EFI Velocity OneFlow workflow system using PJTF output format. On DynaStrip 4.0 for Windows, imposition plans can also be populated with PDF files and benefit from direct-layout PDF page preview.

Compatible with: Windows 95/98/NT/2000/ME/XP

If you have version 3.5 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.0.4 - Windows

Direct-layout PDF preview (Acrobat® 4.0+ required)

• The Raster Mode function can be used to display PDF pages directly in DynaStrip design window. The PDF preview offers the ability to customize the imposition layout based on the page content (example: bleed, crossover images, superimpositon of pages, etc.).
• When clicking on the Raster Mode icon, PDF pages (not thumbnails) show up in the imposition layout, allowing for accurate proofing even when zooming at any percentage.

Special spot color for Outline trim boxes

• DynaStrip has printing options for outline page trims that can be used for imposition proofing or layout only. Outline page trims now use a special color layer called DSOutline. Outlines do not print on other color plates. Therefore, output files created for proofing can also be used for final imaging (ROOM).
• DSOutline color definition can be customized using CMYK colors in the Preferences dialog box. The default color is red (100% Magenta + 100% Yellow).

Ability to place imported marks on a network server (multi-station installations)

• Imported mark definition and adjustment files are saved in the DynaStrip:Marks folder by default. Users can also choose a new folder in the Preferences dialog box.
• When sharing imported mark, it is important to keep the image intact on the server. Any modification in the Image Linker window would affect all jobs using this image. The image size can be changed for a specific job in the Imported Mark Definition window. The "Use this size" option will crop or repeat the image to automatically fill up the entire defined area.
• IMPORTANT NOTE: To use the shared Marks folder, open or create a job, then go to Preferences and link the Marks folder to a folder on the network. For easier use, we recommend that image files (EPS, PDF, etc.) be located in a sub-folder inside the Marks folder.

JDF output mode

• Exporting a job from DynaStrip in JDF format produces two files: an imposition plan using the CIP4 Job Definition Format standard, plus a PDF file for imposition marks. This release of DynaStrip implements generic JDF imposition plans that may have to be more closely integrated with specific workflow systems.

New application icons

• DynaStrip 4.0 features new application and document icons. The main icon represents the encompassing stroke of DynaStrip logo and uses the product package background and colors. All tools icons in the application have also been upgraded to allow for background transparency.

PDF trapping annotations (Trap Network) imposition

• DynaStrip 4.0 offers the ability to impose PDF 1.3 trap network annotations used by Adobe® Extreme® PDF Trapper technology.
• About Trapper technology: When trapping a PDF file in an Extreme® system, the user specifies trapping controls in PJTF. The trapping is executed by the PDF Trapper technology, which generates the traps and stores them as a special annotation in the PDF file. The PDF file can then be printed to the Adobe Printer Job Ticket Processor or an Adobe PostScript 3 RIP. Users can view the trapped PDF file in Acrobat.

New PDF filter

• A new PDF filter detects PDF type (PDF1.3, PDF1.4, PDF/X, securized PDF files, etc.). After PDF document pages are updated in the Document list, the PDF type appears in the list for each file. If the filter encounters a secure or encrypted PDF file, the error message "SEC" displays in the list. The filter also permits PDF pages with a TrimBox definition or without proper cropping information to center automatically in DynaStrip pages.

PDF Output Device configuration for PDF 1.3 or 1.4 creation

• In the Configuration drop down menu of the Output Device Definition window, options are now available for PDF1.3 or PDF1.4. The selected PDF version number will be reflected in PDF imposition files in order to comply with output device’s specifications.

Populated PJTF (Windows only)

• JT imposition plans can now be populated with source files. The user simply has to index PDF files in the Document List & Imposition Index dialog, and output in PJTF mode as usual.

New support for EFI Velocity OneFlow®

• Job Tickets generated by DynaStrip 4.0 are now compatible with EFI Velocity OneFlow workflow system using PJTF output format. On DynaStrip 4.0 for Windows, imposition plans can also be populated with PDF files and benefit from direct-layout PDF page preview.

Compatible with: Windows 95/98/NT/2000/ME/XP

If you have version 3.5 or lower you must purchase an upgrade.

What is new in this release: DynaStrip 4.0.4 - Windows

Direct-layout PDF preview (Acrobat® 4.0+ required)

• The Raster Mode function can be used to display PDF pages directly in DynaStrip design window. The PDF preview offers the ability to customize the imposition layout based on the page content (example: bleed, crossover images, superimpositon of pages, etc.).
• When clicking on the Raster Mode icon, PDF pages (not thumbnails) show up in the imposition layout, allowing for accurate proofing even when zooming at any percentage.

Special spot color for Outline trim boxes

• DynaStrip has printing options for outline page trims that can be used for imposition proofing or layout only. Outline page trims now use a special color layer called DSOutline. Outlines do not print on other color plates. Therefore, output files created for proofing can also be used for final imaging (ROOM).
• DSOutline color definition can be customized using CMYK colors in the Preferences dialog box. The default color is red (100% Magenta + 100% Yellow).

Ability to place imported marks on a network server (multi-station installations)

• Imported mark definition and adjustment files are saved in the DynaStrip:Marks folder by default. Users can also choose a new folder in the Preferences dialog box.
• When sharing imported mark, it is important to keep the image intact on the server. Any modification in the Image Linker window would affect all jobs using this image. The image size can be changed for a specific job in the Imported Mark Definition window. The "Use this size" option will crop or repeat the image to automatically fill up the entire defined area.
• IMPORTANT NOTE: To use the shared Marks folder, open or create a job, then go to Preferences and link the Marks folder to a folder on the network. For easier use, we recommend that image files (EPS, PDF, etc.) be located in a sub-folder inside the Marks folder.

JDF output mode

• Exporting a job from DynaStrip in JDF format produces two files: an imposition plan using the CIP4 Job Definition Format standard, plus a PDF file for imposition marks. This release of DynaStrip implements generic JDF imposition plans that may have to be more closely integrated with specific workflow systems.

New application icons

• DynaStrip 4.0 features new application and document icons. The main icon represents the encompassing stroke of DynaStrip logo and uses the product package background and colors. All tools icons in the application have also been upgraded to allow for background transparency.

PDF trapping annotations (Trap Network) imposition

• DynaStrip 4.0 offers the ability to impose PDF 1.3 trap network annotations used by Adobe® Extreme® PDF Trapper technology.
• About Trapper technology: When trapping a PDF file in an Extreme® system, the user specifies trapping controls in PJTF. The trapping is executed by the PDF Trapper technology, which generates the traps and stores them as a special annotation in the PDF file. The PDF file can then be printed to the Adobe Printer Job Ticket Processor or an Adobe PostScript 3 RIP. Users can view the trapped PDF file in Acrobat.

New PDF filter

• A new PDF filter detects PDF type (PDF1.3, PDF1.4, PDF/X, securized PDF files, etc.). After PDF document pages are updated in the Document list, the PDF type appears in the list for each file. If the filter encounters a secure or encrypted PDF file, the error message "SEC" displays in the list. The filter also permits PDF pages with a TrimBox definition or without proper cropping information to center automatically in DynaStrip pages.

PDF Output Device configuration for PDF 1.3 or 1.4 creation

• In the Configuration drop down menu of the Output Device Definition window, options are now available for PDF1.3 or PDF1.4. The selected PDF version number will be reflected in PDF imposition files in order to comply with output device’s specifications.

Populated PJTF (Windows only)

• JT imposition plans can now be populated with source files. The user simply has to index PDF files in the Document List & Imposition Index dialog, and output in PJTF mode as usual.

New support for EFI Velocity OneFlow®

• Job Tickets generated by DynaStrip 4.0 are now compatible with EFI Velocity OneFlow workflow system using PJTF output format. On DynaStrip 4.0 for Windows, imposition plans can also be populated with PDF files and benefit from direct-layout PDF page preview.